Research on the preparation process of dovetail joints in aluminum

[1]

BAI Y, ZHOU J, ZHONG K, et al. Study on the preparation and mechanical behavior of carbon fiber reinforced aluminum matrix composites stator blade[J]. Thin-Walled Structures, 2024, 205: 112418. DOI: 10.1016/j.tws.2024.112418

[2]

康永强, 陈勇. 铺层复合材料风扇叶片榫头层间应力分析[J]. 航空动力学报, 2020, 35(2): 388-396.

KANG Yongqiang, CHEN Yong. Analysis of interlaminar stresses in layered composite fan blade dovetail joints[J]. Journal of Aerospace Power, 2020, 35(2): 388-396 (in Chinese).

[3]

李杰. 后掠大流量宽弦复合材料风扇叶片技术综述[J]. 航空制造技术, 2009, (17): 49-51. DOI: 10.3969/j.issn.1671-833X.2009.17.007

LI Jie. Overview of technology for sweptback high flow wide chord composite fan blades[J]. Aeronautical Manufacturing Technology, 2009, (17): 49-51 (in Chinese). DOI: 10.3969/j.issn.1671-833X.2009.17.007

[4]

王辉, 周明星, 吴宝海, 等. 航空发动机先进材料高性能零部件制造技术进展[J]. 航空制造技术, 2015, (22): 47-51.

WANG Hui, ZHOU Mingxing, WU Baohai, et al. Advances in manufacturing technologies of high-performance components for advanced materials in aeroengines[J]. Aeronautical Manufacturing Technology, 2015, (22): 47-51 (in Chinese).

[5]

王昆, 王一帆, 陈南梁. 金属化碳纤维连续制备方法及应用研究进展[J]. 复合材料学报. 2024: 1-17.

WANG Kun, WANG Yifan, CHEN Nanliang. Advances in continuous preparation methods and applications of metallized carbon fibers[J]. Journal of Composite Materials. 2024: 1-17 (in Chinese).

[6]

RIQUELME A, ESCALERA R, RODRIGO P, et al. Effect of alloy elements added on microstructure and hardening of Al/SiC laser clad coatings[J]. Journal of Alloys and Compounds, 2017, 727: 671-682.

[7]

BAI Y, ZHOU J, ZHAO C, et al. An experimental strategy and investigation of preparing high-strength and low-expansion carbon fiber reinforced Al matrix composite[J]. Journal of Alloys and Compounds, 2024, 999: 174978.

[8]

杨思远, 王振军, 周金秋, 等. 横向压缩载荷下CF/Al复合材料微观损伤演化与断裂力学行为[J]. 中国有色金属学报, 2020, 30(5): 985-996. DOI: 10.11817/j.ysxb.1004.0609.2020-35758

YANG Siyuan, WANG Zhenjun, ZHOU Jinqiu, et al. Micro-damage evolution and fracture mechanics behavior of CF/Al composites under transverse compressive loads[J]. The Chinese Journal of Nonferrous Metals, 2020, 30(5): 985-996 (in Chinese). DOI: 10.11817/j.ysxb.1004.0609.2020-35758

[9]

朱启晨, 陈勇, 肖贾光毅. 复合材料风扇叶片铺层设计方法研究[J]. 航空发动机, 2018, 44(3): 49-54.

ZHOU Qichen, CHEN Yong, XIAO Jiaguangyi. Research on the design methods of layer configuration for composite fan blades[J]. Aeroengine, 2018, 44(3): 49-54 (in Chinese).

[10]

DIMITRIOS G, MIRKO D, BOSKO R. Dynamic analysis of modified composite helicopter blade[J]. FME Transactions, 2012, 40(2): 63-68.

[11]

DEVI PRIYA T, SUNIL K, DEVENDRA P, et al. Rotor Blade Vibration Measurement on Aero Gas Turbine Engines [C]. Singapore: Springer Singapore, 2021.

[12]

RAWAL S. Metal-matrix composites for space applications[J]. JOM, 2001, 53: 14-17.

[13]

ZHANG J, LIU J, LU Y, et al. Infiltration behavior and mechanism in semi-solid rolling of carbon fibers reinforced Al-matrix composite[J]. Materials & Design, 2019, 182: 108102.

[14]

DAOUD A. Wear performance of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration[J]. Materials Letters, 2004, 58(25): 3206-3213.

[15]

CHIU C, LIU H. Mechanical properties and corrosion behavior of WZ73 Mg alloy/SiCp composite fabricated by stir casting method[J]. Metals, 2018, 8(6): 424.

[16]

WANG J, QIAO T, WANG A, et al. Mechanism of Interlaminar Strengthening and Toughening of Al/CFRP/Al Composite Laminates[J]. Materials, 2023, 16(2): 560.

[17]

张益豪, 严毅, 王振军, 等. CF/Al复合材料制备热变形行为与热残余应力分布[J]. 稀有金属材料与工程, 2022, 51(2): 661-668.

ZHANG Yihao, YAN Yi, WANG Zhenjun, et al. Thermal deformation behavior and thermal residual stress distribution of CF/Al composites[J]. Rare Metal Materials and Engineering, 2022, 51(2): 661-668 (in Chinese).

[18]

MU W, LIN J, LIU E, et al. Fabrication and interface optimization of continuous CF/Al composites with different reinforcement volume fraction[J]. Journal of Alloys and Compounds, 2023, 938: 168297. DOI: 10.1016/j.jallcom.2022.168297

[19]

马子于, 苏震宇, 魏然. 复合材料风扇叶片的发展与思考[J]. 科技与创新, 2020, (13): 34-37.

MA Ziyu, SU Zhenyu, WEI Ran. Development and reflection on composite fan blades[J]. Science and Technology and Innovation, 2020, (13): 34-37 (in Chinese).

[20]

马绪强, 苏正涛. 民用航空发动机树脂基复合材料应用进展[J]. 材料工程, 2020, 48(10): 48-59. DOI: 10.11868/j.issn.1001-4381.2020.000440

MA Xuqiang, SU Zhengtang. Progress in the application of resin-based composites in civil aviation engines[J]. Materials Engineering, 2020, 48(10): 48-59 (in Chinese). DOI: 10.11868/j.issn.1001-4381.2020.000440

[21]

BAI Y, ZHOU J, ZHONG K, et al. Study on Process Parameters of Liquid–Solid Infiltration Extrusion of Continuous Carbon Fiber-Reinforced Aluminum Matrix Composites[J]. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 2024, 55(6): 4981-4996. DOI: 10.1007/s11663-024-03283-z

[22]

BAI Y, ZHOU J, ZHONG K, et al. Al Clad CF/Al Composite Fabricated by a One-Step Liquid–Solid Infiltration–Extrusion Process: Electrochemical Corrosion and Mechanical Behavior[J]. Journal of Materials Engineering and Performance. 2024.

[23]

BAI Y, ZHOU J, ZHAO C, et al. Enhanced strength and toughness of carbon fiber reinforced aluminum matrix composite prepared via novel indirect extrusion method[J]. Journal of Alloys and Compounds, 2024, 1005: 176013. DOI: 10.1016/j.jallcom.2024.176013

[24]

CHEN B, QI L, FU J, et al. Preparation of the high compressive performance special-shaped Csf/AZ91D composite part using the liquid-solid extrusion following vacuum pressure infiltration process[J]. Journal of Magnesium and Alloys. 2024.

[25]

孙坤, 徐红霞, 刘小建, 等. 碳纤维复合材料车削加工技术研究[J]. 固体火箭技术, 2019, 42(6): 814-817. DOI: 10.7673/j.issn.1006⁃2793.2019.06.022

SUN Kun, XU Hongxia, LIU Xiaojian, et al. Research on machining technology of carbon fiber composites[J]. Solid Rocket Technology, 2019, 42(6): 814-817 (in Chinese). DOI: 10.7673/j.issn.1006⁃2793.2019.06.022

[26]

ZHONG K, ZHOU J, ZHAO C, et al. The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites[J]. Journal of Alloys and Compounds, 2022, 904: 164134. DOI: 10.1016/j.jallcom.2022.164134

网址：Research on the preparation process of dovetail joints in aluminum https://m.mxgxt.com/news/view/1769557

相关内容

Beijing Dream Star Star Brokerage Company
IZEA Research: 42% of Gen Z Turns to TikTok Before Major Purchases
Even if she is cheated on, does she still have to lie and smooth things over in front of the audience?
王明星教授 简介
The Architecture of Open Source Applications (Volume 2)nginx
“birth data and horoscope of 20000 celebrities, horoscopes for astrological research”
JunHe Represented the US Basketball Superstar Michael Jordan in a Name Rights Dispute Case Against Fujian Jordan Sports Co., Ltd.
World Journal of Experimental Medicine
Room for Escape: Scribbling Outside the Lines of Template Security
Branding techniques in fashion design

随便看看